Experimentální výpal vybraných minerálů a jeho aplikace při studiu materiálu dvou historických pecí
The experimental firing of small clay bricks with added minerals at the temperates ranging 500–1 000 °C was carried out. Especially green amphiboles, chlorites, biotite and carbonates appeared to be the most suitable minerals for the estimating of firing level. These minerals showed significant changes of colour, pleochroism and birefringence during the firing. Two pottery kilns (La Tène and Late Roman ages) were examined. The material of historic kilns was examined using optical microscopy. Further, microchemism changes were observed. Compared to the results of the experiment, the results of the research of the pottery kilns material showed that the firing temperature must had been higher than 600 °C, but it had not exceed 850 °C. The temperature in the glass kiln ranged 1 250–1 300 °C.
Cultrone, G. – Rodriguez-Navarro, C. – Jose De La Torre, M. (2001): Carbonate and silicate phase reactions during ceramic firing. –Eur. J. Mineral., 13, 621–634.
Duminuco, P. – Messiga, B. – Riccardi, M. P. (1998): Firing process of natural clays. Some microtextures and related phase compositions. – Therm. Acta, 321, 1–2, 185–190.
Hanykýř, V. – Kutzendörfer, J. (2002): Technologie keramiky. – Vega s.r.o., 1–287. Hradec Králové.
Mackenzie, R. C. (1970): Differential thermal analysis. – Academic Press, London, 1–725.
Riccardi, M. P. – Messiga, B. – Duminuco, P. (1999): An approach to the dynamics of clay firing. – Appl. Clay Sci., 15, 3–4, 393–409.
Vedder, W. – Wilkins, R. W. T. (1969): Dehydroxylation and rehydroxylation, oxidation and reduction of micas. – Am. Mineral., 54, 482–509.